国际购销合同中英文版【实用四篇】

签约日期：

买方：

卖方：

本合同由买卖双方缔结，用中、英文字写成，两种文体具有同等效力，按照下述条款，卖方同意售出买方同意购进以下商品： 第一部分

1.商品名称及规格

2.生产国别及制造厂商

3.单价(包装费用包括在内)

4.数量

5.总值

6.包装(适合海洋运输)

7.保险(除非另有协议，保险均由买方负责)

8.装船时间

9.装运口岸

10.目的口岸

11.装运唛头，卖方负责在每件货物上用牢固的不褪色的颜料明显地刷印或标明下述唛头，以及目的口岸、件号、毛重和净重、尺码和其它买方要求的标记。如系危险及/或有毒货物，卖方负

责保证在每件货物上明显地标明货物的性质说明及习惯上被接受的标记。

12.付款条件：买方于货物装船时间前一个月通过 银行开出以卖方为抬头的不可撤销信用证，卖方在货物装船启运后凭本合同交货条款第18条a款所列单据在开证银行议付贷款。上述信用证有效期将在装船后15天截止。

13.其它条件：除非经买方同意和接受，本合同其它一切有关事项均按第二部分交货条款之规定办理，该交货条款为本合同不可分的部分，本合同如有任何附加条款将自动地优先执行附加条款，如附加条款与本合同条款有抵触，则以附加条款为准。 第二部分

14.fob/fas条件

14.1.本合同项下货物的装运舱位由买方或买方的运输代理人 租订。

14.2.在fob条件下，卖方应负责将所订货物在本合同第8条所规定的装船期内按买方所通知的任何日期装上买方所指定的船只。

14.3.在fas条件下，卖方应负责将所订货物在本合同第8条所规定的装船期内按买方所通知的任何日期交到买方所指定船只的吊杆下。

14.4.货物装运日前10-15天，买方应以电报或电传通知卖方合同号、船只预计到港日期、装运数量及船运代理人的名称。以便卖方经与该船运代理人联系及安排货物的装运。卖方应将联系结果通过电报或电传及时报告买方。如买方因故需要变更船只或者船只比预先通知卖方的日期提前或推迟到达装运港口，买方或其船运代理人应及时通知卖方。卖方亦应与买方的运输代理或买方保持密切联系。

14.5.如买方所订船只到达装运港后，卖方不能在买方所通知的装船时间内将货物装上船只或将货物交到吊杆之下，卖方应负担买方的一切费用和损失，如空舱费、滞期费及由此而引起的及/或遭受的买方的一切损失。

14.6.如船只撤换或延期或退关等而未及时通知卖方停止交货，在装港发生的栈租及保险费损失的计算，应以代理通知之装船日期(如货物晚于代理通知之装船日期抵达装港，应以货物抵港日期)为准，在港口免费堆存期满后第十六天起由买方负担，人力不可抗拒的情况除外。上述费用均凭原始单据经买方核实后支付。但卖方仍应在装载货船到达装港后立即将货物装船，交负担费用及风险。

15.c&f条件

15.1.卖方在本合同第8条规定的时间之内应将货物装上由装运港到中国口岸的直达船。未经买方事先许可，不得转船。货物不得由悬挂中国港口当局所不能接受的国家旗帜的船装载。

15.2.卖方所租船只应适航和适货。卖方租船时应慎重和认真地选择承运人及船只。买方不接受非保赔协会成员的船只。

15.3.卖方所租载货船只应在正常合理时间内驶达目的港。不得无故绕行或迟延。

15.4.卖方所租载货船只船龄不得超过 年。对超过 年船龄的船只其超船龄额外保险费应由卖方负担。买方不接受船龄超过二十年的船只。

15.5.一次装运数量超过一千吨的货载或其它少于一千吨但买方指明的货载，卖方应在装船日前至少10天用电传或电报通知买方合同号、商品名称、数量、船名、船龄、船籍、船只主要规范、预计装货日、预计到达目的港时间、船公司名称、电传和电报挂号。

15.6.一次装运一千吨以上货载或其它少于一千吨但买方指明的货载，其船长应在该船抵达目的港前7天和24小时分别用电传或电报通知买方预计抵港时间、合同号、商品名称及数量。

15.7.如果货物由班轮装运，载货船只必须是 船级社最高船级或船级协会条款规定的相同级别的船级，船只状况应保持至提单有效期终了时止，以装船日为准船龄不得超过 年。超过 年船龄的船只，卖方应负担超船龄外保险费。买方绝不接受超过 年船龄的船只。

15.8.对于散件货，如果卖方未经买方事前同意而装入集装箱，卖方应负责向买方支付赔偿金，由双方在适当时间商定具体金额。

15.9.卖方应和载运货物的船只保持密切联系，并以最快的

手段通知买方船只在途中发生的一切事故，如因卖方未及时通知买方而造成买方的一切损失卖方应负责赔偿。

16.cif条件

在cif条件下，除本合同第15条c&f条件适用之外卖方负责货物的保险，但不允许有免赔率。

17.装船通知

货物装船完毕后48小时内，卖方应即以电报或电传通知买方合同号、商品名称、所装重量(毛/净)或数量、发票价值、船名、装运口岸、开船日期及预计到达目的港时间。如因卖方未及时用电报或电传给买方以上述装船通知而使买方不能及时保险，卖方负责赔偿买方由此而引起的一切损害及/或损失。

18.装船单据

18.a.卖方凭下列单据向付款银行议付货款：

18.a.1.填写通知目的口岸的 运输公司的空白抬头、空白背书的全套已装运洋轮的清洁提单(如系c&f/cif条款则注明“运费已付”，如系fob/fas条款则注明“运费待收”)。

18.a.2.由信用证受益人签名出具的发票5份，注明合同号、信用证号、商品名称、详细规格及装船唛头标记。

18.a.3.两份由信用证受益人出具的装箱单及/或重量单，注明每件货物的毛重和净重及/或尺码。

18.a.4.由制造商及/或装运口岸的合格、独立的公证行签发的品质检验证书及数量或重量证书各两份，必须注明货物的全部规格与信用证规定相符。

18.a.5.本交货条件第17条规定的装船通知电报或电传副本一份。

18.a.6.证明上述单据的副本已按合同要求寄出的书信一封。

18.a.7.运货船只的国籍已经买主批准的书信一封。 18.a.8.如系卖方保险需提供投保不少于发票价值110%的一切险和战争险的保险单。

18.b.不接受影印、自动或电脑处理、或复印的任何正本单据，除非这些单据印有清晰的“正本”字样，并经发证单位授权的领导人手签证明。

18.c.联运提单、迟期提单、简式提单不能接受。

18.d.受益人指定的第三者为装船者不能接受，除非该第三者提单由装船者背书转受益人，再由受赠人背书后方可接受。

18.e.信用证开立日期之前出具的单据不能接受。

18.f.对于c&f/cif货载，不接受租船提单，除非受益人提供租船合同、船长或大副收据、装船命令、货物配载图及或买方在信用证内所要求提供的其它单据副本各一份。

18.g.卖方须将提单、发票及装箱单各两份副本随船带交目的口岸的买方收货代理人 。

18.h.载运货船启碇后，卖方须立即航空邮寄全套单据副本一份给买方，三份给目的口岸的对外贸易运输公司分公司。

18.i.卖方应负责赔偿买方因卖方失寄或迟寄上述单据而使买方遭受的一切损失。

18.j.中华人民共和国境外的银行费用由卖方负担。

19.合同所订货物如用空运，则本合同有关海运的一切条款均按空运条款执行。

20.危险品说明书

凡属危险品及/或有毒，卖方必须提供其危险或有毒性能、运输、仓储和装卸注意事项以及防治、急救、消防方法的说明书，卖方应将此项说明书各三份随同其他装船单据航空邮寄给买方及目的口岸的 运输公司。

21.检验和索赔

货物在目的口岸卸毕60天内(如果用集装箱装运则在开箱后60天)经中国进出口商品检验局复验，如发现品质、数量或重量以及其它任何方面与本合同规定不符，除属于保险公司或船行负责者外，买方有权凭上述检验局出具的检验证书向卖方提出退货或索赔。因退货或索赔引起的一切费用包括检验费、利息及损失均由卖方负担。在此情况下，凡货物适于抽样及寄送时如卖方要求，买方可将样品寄交卖方。

22.赔偿费

因“人力不可抗拒”而推迟或不能交货者除外，如果卖方不能交货或不能按合同规定的条件交货，卖方应负责向买方赔偿由此而引起的一切损失和遭受的损害，包括买价及/或买价的差价、空舱费、滞期费，以及由此而引起的直接或间接损失。买方有权撤销全部或部分合同，但并不妨碍买方向卖方提出索赔的权利。

23.赔偿例外

由于一般公认的“人力不可抗拒”原因而不能交货或延迟交货，卖方或买方都不负责任。但卖方应在事故发生后立即用电报或电传告买方并在事故发生后15天内航空邮寄买方灾害发生地点之有关政府机关或商会所出具的证明，证实灾害存在。如果上述“人力不可抗拒”继续存在60天以上，买方有权撤销合同的全部或一部。

24.仲裁

双方同意对一切因执行和解释本合同条款所发生的争议，努力通过友好协商解决。在争议发生之日起一个合理的时间内，最多不超过90天，协商不能取得对买卖双方都满意的结果时，如买方决定不向他认为合适的有管辖权的法院提出诉讼，则该争议应提交仲裁。除双方另有协议，仲裁应在中国北京举行，并按中国国际贸易促进委员会对外贸易仲裁委员会所制订的仲裁规则和程序进行仲裁，该仲裁为终局裁决，对双方均有约束力。仲裁费用除非另有决定，由败诉一方负担。

卖方： 买方：

年 月 日

卖方：_________________________________邮码：_________________________________电话：_________________________________法定代表人：___________________________职务：_________________________________

乙方：_________________________________地址：_________________________________邮码：_________________________________电话：_________________________________法定代表人：___________________________职务：_________________________________

经卖买双方友好协商一致同意成交下列商品，订立条款如下，共同遵守：

乙.商品：________________________

二.规格：________________________

三.数量：________________________

四.单价：________________________

五.总价：..________________________

六.包装：________________________

七.装运期：________________收到信用证后____天。

八.装运口岸和目的地：从____________经____至____________。

九.保险：________________________

十.付款条件：________________________

买方须于____年__月__日前将保兑的、不可撤销的、可转让、可分割的即期信用证开到卖方。信用证议付有效期延至上列装运期后____天在________到期。

买方须于签约后即付定金________%。

十一.装船标记及交货条件：货运标记由卖方指定。

十二.注意：开立信用证时请注明合同编号号码。

卖方：____________________

代表：____________________

买方：____________________

代表：____________________

签订日期：________________

购销合同范文

本合同于_____________年_____________月_____________日，由_____________(以下简称甲方)和________________(以下简称乙方)，在___________________经过友好协商签订，双方共同遵守执行。

第一条乙方所提供的产品及费用清单产品名称 ________ 型号规格 ________ 数量 ________ 单价 ________ (元)合计 ________(元)总金额 ________ (大写)

第二条包装：_________________由乙方按国家标准进行包装。任何因包装不善所致之损失均由乙方负责。

第三条交货期：_________________自本合同生效之日起至验收合格之日止________________天。

第四条交货地点和方式

1.交货地点：_____________.

2.交货方式：_________________乙方将货物运至甲方指定的目的地。乙方负责办理货物运至甲方指定的目的地，包括保险和储存在内的一切事项，有关费用已包括在合同总价中。

第五条付款方式

1.本合同生效后，甲方在______个工作日内向乙方支付本合同总价的__________%作为预付款;

2.甲方对乙方所提供的产品验收合格后，乙方出具合同总价的全额销售发票，甲方在_____________个工作日内支付本合同全部余款。

第六条质量保证和售后服务

1.乙方承诺所提供甲方的产品质量具有可追溯性，产品质量保证期为_____________天，自交付之日起计算。

2.在产品质量保证期内，如出现产品质量问题，甲方有权随时要求乙方免费维修或更换;如属甲方人员使用不当不能正常使用，乙方也应及时提供维修服务，但甲方应承担乙方人员的差旅费和材料成本费用。

第七条合同的修改

任何对本合同条款的变更、修改均须双方签订书面的修改书。变更后的内容与本合同(被修改部分除外)具有同等法律效力。

第八条违约责任

在合同履行期间，乙方延期交货、甲方延期付款，除双方协商同意免责外，均按未交付/未支付本合同价款日的__________%承担违约责任

第九条争端的解决

合同实施或与合同有关的一切争端应通过双方友好协商解决。如果友好协商不能解决，各方均可向有管辖权的人民法院起诉。

第十条合同生效及其它

1.本合同应在双方授权代表签字、单位盖章、预付款到达乙方指定账户生效。

2.本合同正本一式四份，双方各持两份，具有同等法律效力。

3.合同如有未尽事宜，须经双方共同协商后作出补充规定，补充规定与本合同具有同等效力。

甲方：_________________(盖章)________________乙方：_________________(盖章)_________________

授权代表：_________________授权代表：________________

法定代表人：_____________法定代表人：_________________

通讯地址：_____________通讯地址：________________

电话：________________电话：___________________

传真：________________传真：___________________

开户银行：_____________开户银行：________________

账号：________________账号：________________

国际专利许可合同英文版

专利实施许可合同备案工作是国家知识产权局为了切实保护专利权，规范交易行为，促进专利实施而对专利实施许可进行管理的一种行政手段。今天第一范文网小编为大家准备的是英文版的国际专利许可合同。具体内容如下，仅供参考阅读，希望能帮助到大家!

patent license contract

（国际专利许可合同）

con tract no:

conclusion date:

conclusion place:

index

article 1 defininitions article 9 guarantees and claims

article 2 scope of the contract article 10confidentiality

article 3 price of the contract article 11infringements

article 4 conditions of payment article 12 taxes andduties

articfe 5 technical service and training article 13 forcemajeure

article 6 technical documentation article 14 arbitration

article 7 verification and acceptance article 15 app1icable law

article 8 technical improvement article 16 duration

appendixes

appendis 1 name， content of patent documents and application of the patents

appendix 2 models， specifications and technical lndices of the contract product

appendix 3 the starting date and counting methods of royalty

appendix 4 the content and method of licensor’s auditing

appendix 5 training of party a’s personnel

appendix 6 technical service or specialist send by party b

appendix 7 verification and acceptance of the contract product this contract made____

on_____________ day of____________，by and be-tween __________，organized and existing

under the laws of the people’s republic of china. with rehistered office at (hereinafter

referred to as party a) of the first part and __________，organized and existing under

the laws of ____________，with its principal office at________________.

witnessth

whereas the patent right which said in the contract os owned by party b.

whereas party b has the right and agreed to grant paryt a the rights to use，

manufac-ture and sell the contract products of the ppatented technology;

whereas party a hope to use the patented technology of party b to manufacture and sell

thecontract products;

both parties authorized representatives， through friendly negotiation， have agree

to en-ter into this contract under the ertms as stipulated below;

artide 1 definitions

for the purpose of this contract， the following terms have the following meanings;

1.1.‘patented technology’means those letters patent， and applications therefor

presently owned or hereafter acquired by party b and/or which party bhas or may have the

rigt to control or grant license thereof during the term hereof in any or all countries

of the world and which are applicable to or may be used in the manufacture of cotract

products.

1.2. ‘contract products’mians the products described in appendis2 annexed hereto，

to-gether with all improvements and modifications thereof or developments with respect

there-to.

1.3. ‘patty a’means____________. or his legal representative， agent and inhetitor to theproperty of the company.

1.4. ‘party b’ means___________，or his legal representative，agent and inheritor，

to the property of the company.

1.5. ‘the contraet factory’ means the place which party party a manufactures the

contract products. that is_______________.

1.6.‘spare p`menas replacement parts for contract products or for any part there-of.

1.7. ‘components’means those components and parts of contruct produets which par-ty

b has agreed or may from time to time agree in writing to permit party a to manufacture

1.8. ‘technical documents’meane engineering， manufacturing and originating

1.9 ‘net selling price’ menans remaining amount of invoice value of the

1.l0 ‘the date of coming into effect of the contract’means the date of raification

article2 scope of the contract

2.1. party a agrees to acquire from party b and party b agrees to transfer to party a

2.2 party b grants party a the non-exclusive right to design and manufacture

2.3 party b shall be responsible to provide party a with documents relevant to the

2.4 the contract does not cover the patented technology for the parts from other

2.5 party b shall be responsible for the training of party a’s technicl personnel

2.6 party b is obliged to send at its own expense technical personnel to party a’s

facto-ry for technical service (details as per appendix 6 to the contract).

2.7 if it is required by party a. pafrty b shall be under an obligation to provide party aat the most favourable price wity parts， accessories， raw materials， fittings，

2.8 party b grants party a the rignt to use party b’s trade mark， and use the

3.1 price of the contract shall be calculated on royalty in accordance with the

3.2 royalty under the contract shall be paid from__________ months after the the date

3.3 royalty at the rate of__________ % (___________percent ) shall be calcuated in

3.4 the report of the selling quantity， net selling amount of the contract products

3.5 the contract products sold by party a pursuant to the patent license herein granted shall be deemed to have been sold when paid for.

3.6 if the contract products are returned or allowances made thereon after the royalty

3.7 if party b demand to audit the accounts of party a，it shall notice party a within

3.4 of the contract.the speeific content and procedure of auditing accounts are

4.1 royalty stipulated in section 3 to the contract shall be effected by party a to

4.2 party b shall immediately issue the related documents ofter receiving the written

a. four copies of the statement on calculation of the royalty;

b. four copies of the commercial invoice;

c. two copies of the sight draft.

4.3 party a shall have the right to deduct from any of the above mentioned payment the ppenalties and/or compensations which party b shall pay in accordance with the

stipulations ofthe contract.

articie 5 technical service and training

5.1 technicgl service

5.1. l during the validity period of the contract， party b shall send a specialist to

5.1.2 party b shall twice send it’s specialists to party a’s factory to provlde

5.l.3 the first technical service sha1l start in the sixth month after the contrayt

5.1.4 the second technical service shall start during the verification of the

5.1.5 party b shall， for its specialists， bear their travelling expensee. partha

5.2 technical training

5.2 1 party b shall train party a’s technical personnel so as to enable them to

masterparty b’s design， performance test and technology in machining， erection and inspection of the contracted products， so that party a can use the technical documents

5.2.2 party a shall send twice its technical personnel to party b’s factory for

5.2.3 the first training shall be from the third to the fourth month after the

5.2.4 the second training shall be from the eighth to the nineth month. party a shall

sent 4 technical persons and an interpreter to party b’s factory for training for 160

working days/man (5 days per week). the training shall cover the designing， the

manufacturing technology，erection and adjustment of the contracted products.

5.2.5 party a shall bear the travelling expenses of its trainees; party b shall

provide party a’s trainees free of charge with boarding， lodging and means of

conveyance for travel- ling between the lodging place and the factory.

article 6 technical documents

6.1 party b shall， according to the delivery schedule and details stpulated in

appendix 2to the contract， deliver the documents at________________.

6.2 the date stamped by the air transportation ageney at____________，shll be taken

as the actual date of delivery paryt a shall send to party b a photostat copy of the

airconsignment note shwing the stampde date of arrival.

6.3 within twenty-four hours after the despatch of each lot of the technical documente，

party b shal1 notify party a by cable or telex of the contract number， number and date

of the air consignment note， items of the documents， number of pieces， airmail to

party a two copies of each of the air consignment note and detaikled list of the

technical documents.

6.4 if the technical documents are foumd lost， damaged or mutilated during air

trans-portation， party b shall supply party a free of charge with a second lot of

documents within thechortest possible time but not later than thirty days after it has

received from party a the writtennotice. within sixty days after party a has received

the documents from party b，if party a does not declare the shortage and request to

cover the same， it is considered asa-cepted.

6.5 the technical documents shall be in english and based on metric system of

measure-ments.

article 7 verification and acceptance

7.1 the verification test on the first samplemachine of the contracted product shall be carried out by the joint group consisting of party a’s and party b’s representatives

accordingto the schedule and contents stipulated in appendix 7 to the contract. lf the

performance of the contracted product is in conformity with the technical specifications

stipulated in ap-pendix 1， such testshall be considersd as qualified and the

representatives of both parties shll sign the inspection and testing certificate for the

proper performance of the contracted product in quadruplicate， 2copies for each party.

7.2 if the verification test demonstrates that the performance of the contracted

prod-uct isnot in conformity with prescribed technical specifications， both parties

shall， throughamicable negotiations，make a joint study of and analyse the cause and

take measures to e-liminate the defects and carry out asecond test. when the second test

demonstuates tha the performance is qualified， both parties shall sign a testing

certificate for the proper perfot- mance

7.3 if party b is responsible for the failure of the first test， party b shall send

at ist own expense technical ersonnel for the second test.

7.4 if the second test fails again and the failure is attributed to party b， party b

shallindemnify party a for any losses sustained and shall take effective measures to

eliminate thedefects and carry out a third test.

7.5 if the third test again fails， and if party b is responsible for the failure，

party a has the right to terminate the contract at its discretion and lodge claims as stipulated ih article9.if the responsibility for the failure lies with party a， the two

parties shall negotiate as tohow to further implement the contract.

article 8 technical improvements

8.1 if the technical documents provided by party b are not applicable to party a’s

actualproduction condidions (such as design standards， raw materials， purchased parts

for the ma-chine， production facilitie)， party b is obliged to assist party a in

modifying the technicaldocuments and confirm the same. upon the condition that the

properties of the contracted products are not affected， raw materials， fittings and

equipmint of chinese origin may be used.

8.2 during the currency of the contract. if eithet of the two parties effets improve-

ments on or developments of the products within the xcope stipulated in the contract，

thd said party shall submit， free of charge， to the other party the technological

information con-cernign such improvements or developments.

8.3 the ownership of such improvements on or developments of the ontracted product

shall belong to the party who has effected such improvements or develpments. the othe

paryt shall not apply for patent ortransfer the same to any third arty.

article 9 guarantees and claims

9.1 party b guarantees that the technical documents to be supplied by party b are the

latest technical information which has been put into practical use by party b. party b

also undertakesto supply to party a in time the technical information relevant to any develop-ment of or improvement on the contracted product.

9.2 party b guarantees that the technical documents to be supplied by party b are

com-plete，correct，legible and are to be despatched in time.

9.3 if the documents suppied by party b are not in conformity with the stipulation

in article 6， party b shall， within the shortext possible time but not later than 3o

days after re-ceipt of party a’s written notice， despatch free of charge to party a

the missing or the cor- rcet and legible technical socuments.

9.4 if party b fails to despatch the said documents within the stipulated period as

per appendix 2 party b shall pay penalty to party a in the following proportions:

(a)...percent of the total contract price for delay from 1 to 4 weeks.

(b)...percent of the total contract price for delay form 5 to 8 weeks.

(c)...percent of the total contract price for delay exceeding weeks;

9.5 the payment of penalties by party b to party a as stipulated in article 9 shll

not releve party b of its obligation to deliver the said documents.

9.6 whenever the delay in delivering the said documents exceeds 6 months， party a

shall be entitled to terminate the contract at its discretion and party b shall be

obliged to re- fund party a all its payments together with the corresponding ingerest

at the rate of... per-cent per annum.

9.7 if the verification tests fail with the responsibility lying with party b and if，as theresult，party a cannot start normal production with the contract having to be

terminated， party b shall erfund all the payments previously made by party a to party b

together with the interest at the rate of... percent per annum.

9.8 if only some aspects of the properties of the product are not up to the standards

asstipulated in the contract and the responsibility lies with party b， party b shall

10. 1 all drawings， designs， specifications and all other technical information

10.2 ln case any part (s) or all of the above-mentioned technical information have

10.3 after the termination of the contract， party a shall have the rigbt to use

manufacture，use，and export contract products.

11.1 party b guarantees that it is the legitimate owner of the patent to the

patent to party a. of accusation of infringing the rights of a third party occurs，

economicresponsibilities trising therefrom

11.2 a complete list of party b’s patents and patent applications relevant to

12.1 ail taxes， customs duties and other excises arising in connection with the

12.2 in the execution of the contract， any income made by party b within the

13.1 if either of the contracting parties is prevented from executing the contract by forcer majeure events such as war， serious flood， fire， typhoon and earthquake，

13.2 the involred party shall notify the other party by telex or cable within the

13.3 should the force majeure event last more than one hundred and twenty(120)con-

14.1 all disputes arisint from the execution of or in connection with the cotract

can be reached through consultations， then the disputes shall be submitted to

14.2 the arbitration shall take place in stockholm， sweden， and be conducted by

14.3 the arbitration award shall be final and binding upon both parties.

l4.4 the arbitiation fee shall be borne by the losing party.

l4.5 if the arbitration involves only a part of the contract， then in the course of arbitra-tion， the execution of the contract shall be continued except the part which is

article 15 applicable law

articl l6 duration

16.1 the contrant os signed on may 8， 1993， by authorized represenatives of botb

both partfies shallexert their best efforts to obtain the approval within sixty (60)

16.2 tbe contract shall be valid for ten (10) years beginning from the date of its

validity period of the contract.

16.3 the termination of this contract shall not affect in any way the outstanding

party a :_________________ party b:___________________

by_______________ by__________________